Author Topic: DAW sleeves  (Read 1347 times)

Offline tonybka

  • Newbie
  • *
  • Posts: 6
    • View Profile
DAW sleeves
« on: April 24, 2008, 12:47:07 PM »
I have been using DAW sleeves for my long distance bicycle riding. They work well for riding since they are thinner, and don't bunch up behind your knee. I do not use them for everyday work. The problem is that since they are thinner, they tend to get holes in them easily. I have tried silicone glue, bicycle tube patches and a couple of other things to patch the hole, but nothing seems to stick well. My next try is wetsuit cement. I have tried to contact DAW in San Diego, CA to no avail. Any suggestions?



Offline naseigfried

  • Full Member
  • ***
  • Posts: 64
  • Me on the right with Theron, my great legman. RIP
    • View Profile
    • My MySpace page
Re: DAW sleeves
« Reply #1 on: April 25, 2008, 08:13:01 AM »
Don't waste your money on wetsuit cement. I've already tried that. I've had the same problem with DAW products. I only use Alps sleeves now. They last a lot longer.
LBK since April 2004

Offline Mitchee

  • Hero Member
  • *****
  • Posts: 180
  • Oshkosh, WI
    • View Profile
Re: DAW sleeves
« Reply #2 on: April 25, 2008, 11:46:25 AM »
I am also an avid bike rider.  I use an Ossur Iceross Sport liner.  It is also a thin (3mm) liner.   I haven't haven't had any problems with them bunching up behind my knee or developing any holes in them.

Good luck finding a liner that holds up to your long distance cycling.   :)

Initial injury:  July 1985
Amputation:  December 2006 - Ertl LBKA

"The journey of a thousand miles must begin with a single step."
 -Lao Tzu